Description

Zeta II Helmet Liner by Oregon Aero NSN: 8415-01-580-5500

Zeta II Helmet Liner by Oregon Aero for HGU-56P rotary wing ballistic flight helmet in size Large

• NSN: 8415-01-580-5500
• Length: 17″
• Thickness: 1/2″
• #9A-0017-103
• 1/2″ Thick. For Styroliner internal measurement 17″ (for size Large HGU-56P helmet)

PM Air Warrior Approved: The lightweight Oregon Aero® Zeta II® Helmet Liner was tested by the U.S. Army Aeromedical Research Laboratory and provides the same benefits as the Oregon Aero® Zetaliner® Helmet Liner. Zeta II® was designed for maximum comfort, protection, and helmet stability. Helmet liner is self-wicking to dissipate perspiration and keep you cooler. Your Zeta II® Helmet Liner is easy to fit, install, and maintain. Helmet Liner is equally effective while wearing Night Vision or other externally mounted equipment.

Cleaning Instructions: Hand wash your Zeta II® with mild soap and rinse thoroughly. To dry, place your helmet liner flat on a large towel. Fold the towel over to cover liner. Use a rolling pin or similar object to squeegee out the excess water. Do not wring liner. Re-Shape your Zeta II® Helmet Liner and allow it to air dry in a warm place or in front of a fan. Do Not Use Any Artificial Heat Source to Dry. Unless conditions are humid, your liner should dry overnight.

Note: Wringing your Zeta II® or drying it with an artificial heat source will damage the liner. Use recommended methods of care only.